Dab+/Dab Display Modes - Hitachi AXM860E Instruction Manual

DAB+/DAB Display Modes

Every time you press the STOP/MENU/INFO
the following display modes: Programme Type, DLS, Multiplex Name, Channel no. /
Frequency, Audio Mode / Audio Bit Rate, Signal Strength, Time/Date.
The information is displayed on the lower segment of the display.
GB
Programme Type
This describes the style of the programme that
is being broadcast. If the information is not
available, the display will show "<Programme
Type>".
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message
that the broadcaster may include with their
transmissions. The message usually includes
information, such as program details etc.
Multiplex Name
A multiplex is a collection of radio stations that
are bundled and transmitted on one frequency.
There are national and local multiplexes. Local
ones contain stations that are specific to that area.
DAB – unlike normal radio, groups together several
radio stations and transmits them on one frequency.
Channel no. / Frequency
The channel no. and the frequency of the present
station will be displayed (e.g. 13B, 232.496 MHz).
Audio mode / Audio Bit Rate
The display will show the audio mode (e.g. stereo,
mono, etc.) and the digital audio bit rate being
received.
Signal Strength
The display will show a slide bar to indicate the
signal strength, the stronger the signal, the longer
the bar will be from left to right.
Time/Date
The broadcaster (Radio station) provides clock
and date information automatically so there's
no need to manually set this information. If the
information is not available, the display will show
"<Time/Date>".
20
button, the display will cycle through
Programme Type
DLS
Multiplex Name
Channel no. / Frequency
Audio Mode / Bit Rate
Signal Strength
Time/Date