Tests Menu - Agilent Technologies 8719ET Service Manual

8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers

Tests Menu

To access this menu, press
(TEST [D])
TESTS
NOTE Descriptions of tests in each of the categories are given in
on page
The tests are divided by function into the following categories:
To access the (default) test in each category, press the test category softkey. To access the
other tests, use the numeric keypad, step keys, or front panel knob. The test number,
name, and status abbreviation will be displayed in the active entry area of the display.
Table 10-1 shows the test status terms that appear on the display, its definition, and the
equivalent GPIB code. The GPIB command to output the test status of the most recently
executed test is OUTPTESS. For more information, refer to
Definitions" on page
Table 10-1 Test Status Terms
Test Status Terms
PASS
FAIL
-IP-
(NA)
-ND-
DONE
Service Guide
SERVICE MENU
System
accesses a menu that allows you to select or execute the
service tests. The default is set to internal test 1.
10-8.
Test Category
Internal Tests
External Tests
System Verification Tests
Adjustment Tests
Display Tests
Test Patterns
10-31.
Definition
PASS
FAIL
IN PROGRESS
NOT AVAILABLE
NOT DONE
DONE
Service Key Menus and Error Messages
Service Menus - Internal Diagnostics
.
TESTS
"Test Descriptions"
Range of Tests
(0–20)
(21–25)
(26–42)
(43–54)
(55–61)
(62–76)
"GPIB Service Mnemonic
GPIB Code
0
1
2
3
4
5
10- 5