Flash Mode - Sony ILCE-7RM2 How To Use Manual

2. Press the shutter button fully down.
Note
You cannot use the flash when recording movies.
While charging the flash,
icon will light up.
Before attaching/removing an accessory such as a flash to/from the Multi
Interface Shoe, turn off the product first.
When attaching an accessory, insert it fully to the Multi Interface Shoe and
screw tightly. Also, make sure that the accessory is fixed securely to the
product.
Do not use a commercially available flash with high-voltage synchro terminals
or with reverse polarity.
When shooting with the flash and the zoom is set to W, the shadow of the lens
may appear on the screen, depending on the shooting conditions. If this
happens, shoot away from the subject or set the zoom to T and shoot with the
flash again.
The corners of a recorded image may be shaded, depending on the lens.
[53] How to Use

Flash Mode

You can set the flash mode.
flashes. After charging is completed, the flashing
Using shooting functions Using the flash