Samsung AR07TSFABWKN Service Manual page 58

Troubleshooting
•
After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will be saved
when entire segments blinks and tracking mode begins.
Setting to Cool or Heat
only mode
Power improvement
mode
Mixed mode indoor
input
Auto Change Over
Channel address
Cool
Heat
• If the outdoor unit is turned off and then immediately turned on again, the compressor does not operate for about
3 minutes.
CAUTION
• During the Cool mode, frost may temporarily develop on valves and other parts.
• You can also test the Cool or Heat Try run using K1 button.
NOTE
4-26
SEG1 SEG2
Main 0 0
Main 0 1
Main 0 2
Main 0 3
Main 0 4
SEG3
0 0
0 1
0 2
0 0 Disabled (Factory default)
0 1
0 0 Disabled (Factory default)
0 1
0 0 Disabled (Factory default)
0 1 Enabled (Factory default)
A U Automatic setting (Factory default)
00 ~ 15
Only Cooling
Only Heating
Enabled
Enabled
Manual setting
Samsung Electronics