Connecting The Acoustimass Module - Bose 3-2-1 Owner's Manual

Figure 12
Making the left and right
speaker connections
Figure 13
Left and right speaker
placement
Connecting the Acoustimass
Figure 14
Connecting the
Acoustimass module to the
media center
3. Plug the connector labeled LEFT into the jack on the rear of the left speaker (Figure 12).
4. Plug the connector labeled RIGHT into the rear jack on the right speaker.
Note: When properly inserted, there will be a small gap between the plug and the
speaker panel.
Left and right speaker placement
For optimal audio surround effects, be sure to place the LEFT speaker to the left of the TV as
you face it. Place the right speaker to the right of the TV as you face it (Figure 13).
®
module
1. Locate the jack labeled MEDIA CENTER on the rear of the Acoustimass
the right-angle connector (Figure 14) of the module cable into the MEDIA CENTER jack.
2. Locate the jack labeled ACOUSTIMASS MODULE on the rear panel of the media center.
Insert the other end of the module cable into the ACOUSTIMASS MODULE jack.
3. Firmly tighten the two screws at each end of the module cable.
AUDIO INPUT
VIDEO VIDEO AUDIO SPEAKERS
O IDEO 2 AUX INPUT OUTPUT OUTPUT
L L D L C C L
ACOUSTIMASS MODULE
R R D R
S S R
WARNING: Do not plug the Acoustimass module's power cord into the wall outlet until all
other system connections have been made.
Acoustimass
module cable
AM271966_00_V.pdf August 18, 2003
System Setup
® module. Insert
15