Changing Cd Settings; Using The Sleep Timer; Using The Radio; Tuning - Bose 3-2-1 Owner's Manual

Selection: CD setting options:
Sleep Timer:
Track:
Track Time:
CD Status
Audio Setup
System Setup

Using the sleep timer

Using the radio

Changing CD settings

While the system is in CD mode, press the Settings button on the remote control to gain
access to the options shown here. For more details on changes you can make to the settings,
refer to the Sound Adjustments and System Adjustments sections that follow in this guide
What the setting affects:
Off Timer not set.
mm:ss Set to turn system off (not the components) when time (01:00 to 90:00
minutes) expires.
1 of n Chooses the CD track by number.
h:mm:ss Moves to that time/place in the track.
selection Displays information about the CD source.
selection See Sound Adjustments page 40.
selection See System Adjustments page 42.
Your system includes a sleep timer which can be set to turn your system off automatically
after 1 to 90 minutes of listening to any source. This timer can be accessed through the
Settings menu. See "Locating system settings" on page 42.
Note: Remember that system controls, like the sleep timer, will not turn off the TV or other
sound source components.
Press or on the remote to select the radio tuner. If the system is off, this will turn it on
to the most recently selected station in that band.

Tuning

You can tune to a radio station in the following ways:
If you want to:
Switch bands
Seek the strongest stations
Manually tune to a station
Select a preset station
While the system is in AM or FM mode, and the TV is on, you can press the Settings button
on the remote control to gain access to the options available for that band. For more details
on changes you can make to the settings, refer to the Sound Adjustments and System
Adjustments sections that follow in this guide.
Do this:
Press or on the remote for the band you want.
Press and hold Seek
radio begins seeking. Release to stop at the next strongest
station.
To stop sooner, briefly press Seek
To begin seeking again without holding down the skip
button, briefly press Seek
first seek operation stops.
Press Tune or
Press Preset
or
Press that number on the keypad.
AM271966_00_V.pdf August 18, 2003
Operation
or on the remote until the
or .
or again as soon as the
on the remote.
.
37