Power Switch And Cables; Removing The Power Switch And Cables - IBM IC922 Servicing

Figure 60. Replacing the power supplies in the system
3. Reconnect the power cords to the power supplies.
For instructions, see "Connecting power cords to the 9183-22X system" on page 162.
Removing and replacing the power switch and cables in the 9183-22X
system
Learn how to remove and replace the power switch and cables in the IBM Power System IC922
(9183-22X) system.
About this task
The power switch includes the front USB port.
Removing the power switch and cables from the 9183-22X system
To remove the power switch and cables, complete the steps in this procedure.
Before you begin
Power off the system and place it in the service position. For instructions, see "Preparing the 9183-22X
system to remove and replace internal parts" on page 146.
Procedure
1. Attach the electrostatic discharge (ESD) wrist strap.
70 Power Systems: Servicing the IBM Power System IC922 (9183-22X)