Table of Contents
Advertisement
a) Label all of the drive cables that connect between the drive backplanes and the drive PCIe
adapters. Note the connector number on the drive backplane and the connector number on the
PCIe adapter.
b) Simultaneously rotate the two latches at (A) up as shown in the following figure. Lift the fan cage
assembly from the system.
Figure 44. Removing the fan cage assembly
c) Disconnect the front drive cables from the drive backplane.
Press the cable connector latch and disconnect the front drive cable from the drive backplane as
shown in the following figure. Be sure to unlatch the cable from the connectors. Do not pull in the
cables themselves; unplug the cables by using the connector.
52 Power Systems: Servicing the IBM Power System IC922 (9183-22X)
Advertisement
Table of Contents
