Operation And Set-Up - Wilton 2221VS Operating Instructions & Parts Manual

Introduction
This manual includes operating and maintenance
instructions for the Wilton Model 2221VS, 2223VS,
2232AC and 2234AC Variable Speed Drill Presses.
This manual also includes parts listings and illustra-
tions of replaceable parts.
Wilton Model 2221VS and 2223VS drill presses
feature manual speed control. Models 2232AC and
2234AC have inverter speed control. This manual
contains procedures for both speed control versions.
The manual provides separate instructions when
differences in operation and maintenance exist.
Refer to Figures 1 and 2 for key features of the drill
press.
Control
Panel
Speed
Adjustment
Handwheel
Switch
Depth
Indicator
Spindle
Figure 1: Drill Press Features
(Manual Speed Control Model)

Operation and Set-up

Securing the Base
The base of the drill press has four mounting slots;
two slots on both sides of the base. The drill press
should be level and rest solidly on the floor. Place
shims under the four mounting slots in the base as
needed to level the drill press.
When securing the base to the floor, apply even
torque to the fasteners to prevent distortion of the
base.
Electrical
Enclosure
(hidden, far
side)
Drill
Head
Control Panel
Head
Clamping
Nuts (2)
Drive
Motor
Spindle
Depth
Handle
Indicator
Column
Spindle
Work
Table
Base
Mounting
Slots (4)
Figure 2: Drill Press Features
(Inverter Speed Control Model)
Drive
Motor
Speed
Shift Lever
Head
Clamping
Nuts (2)
Electrical
Enclosure
Column
Spindle
Handle
7
Work
Table
Base
Mounting
Slots (4)