Questions And Answers - White Rodgers 1F97W-71 Operation Manual

1. How can I permanently change a part of my
program?
VIEW
Press and
PRGM
time/temperature schedule you want. Then
TIME
press or
FWD
change the program. See PROGRAMMING
YOUR THERMOSTAT.
2. How can I have no change in temperature
from one time period to another?
Simply select the same temperature for each
consecutive time period. For example, you
may select the same COOL A temperature for
period 2 as you did for period 1, which means
the temperature will not change from COOL A
when period 2 begins. See PROGRAMMING
YOUR THERMOSTAT.

QUESTIONS AND ANSWERS

ADV
until you reach the
DAY
TIME
and and
BACK
3. How can I finish my programming if the
display has already changed to time/tem-
perature?
During programming, if no buttons are pressed
for five minutes, the thermostat will enter the
HOLD mode and maintain a constant tem-
to
perature. The display will change to the time/
temperature mode. To resume programming,
VIEW
press
PRGM
point where you stopped programming. Then
you may continue to program the thermostat
normally. If you want to stop programming at
this point, press
program function.
YOUR THERMOSTAT.
ADV
and until you return to the
DAY
RUN
to start the normal
PRGM
See PROGRAMMING
33