Table of Contents
Advertisement
1. How can I permanently change a part of
my program?
Press
and
VIEW
PRGM
time/temperature schedule you want. Then
press
or
change the program (remember, when you
change the time, you are changing it for both
the heating and cooling programs). See
PROGRAMMING YOUR THERMOSTAT.
2. How can I have no change in tempera-
ture from one time period to another?
Simply select the same temperature for
each consecutive time period. For example,
you may select the same COOL A tempera-
ture for period 2 as you did for period 1,
QUESTIONS AND ANSWERS
until you reach the
ADV
DAY
and
TIME
and
TIME
FWD
BACK
which means the temperature will not change
from COOL A when period 2 begins. See
PROGRAMMING YOUR THERMOSTAT.
3. How can I finish my programming if the
display has already changed to time/
to
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat will
enter the HOLD mode and maintain a con-
stant temperature. The display will change
to the time/temperature mode. To resume
programming, press
you return to the point where you stopped
programming. Then you may continue to
program the thermostat normally. If you
want to stop programming at this point,
VIEW
and
until
ADV
PRGM
DAY
33
Advertisement
Table of Contents
