White Rodgers 1F97W-71 Operation Manual page 29

Program Cooling Temperatures
CAUTION
!
If outside temperature is below 50 F, we
recommend that you remove the thermo-
stat from the wall before proceeding with
the following steps to program cooling
temperatures. Personal injury and/or prop-
erty damage could result from air condi-
tioner compressor slugging. Fresh "AA"
alkaline batteries (such as Energizer
brand) must be installed to perform off-
wall programming. Programming away
from the wall should prevent accidental
compressor operation.
SYSTEM
PRESS UNTIL OFF IS DISPLAYED
HEAT-OFF-COOL-AUTO
BEFORE REATTACHING THE THERMO-
STAT TO THE SUBBASE!
®
BE SURE TO
1. To program cooling temperatures for the heat-
ing/cooling periods you have already set, press
SYSTEM
until COOL is displayed.
HEAT-OFF-COOL-AUTO
VIEW
2. Press once. The Monday heating/
PRGM
cooling period 1 start time you programmed
earlier will be displayed, along with the cur-
rently programmed COOL A, B, C, or D tem-
perature.
3. Press or
B, C, or D temperature you want for Monday's
heating/cooling period 1. If you want the fan to
run continuously during this period, press
FAN
until PRG FAN is displayed.
ON – AUTO
VIEW
4. Press , then press
PRGM
select Monday's COOL A, B, C, or D tempera-
ture for period 2. If you want the fan to run
to display the COOL A,
or to
29