Operating Your Thermostat - White Rodgers 1F94-71 Operation Manual

7 day multi-stage/heat pump electronic digital thermostat

Hide thumbs Also See for 1F94-71:

Table of Contents

Before you begin programming your thermo-

stat, you should be familiar with its features and

with the display and the location and operation

of the thermostat buttons. The information in

this section will help you become familiar with

your new thermostat so that you can easily

program it.

Your thermostat consists of two parts:

thermostat body and the subbase.

CAUTION

Remove power from the system at the

circuit breaker/fuse box before remov-

ing or attaching the thermostat body.

Equipment damage and/or personal in-

jury could occur.

OPERATING YOUR THERMOSTAT

The subbase is attached to the wall, but you can

remove the thermostat body for easy program-

ming. To remove the thermostat body from the

subbase, grasp the thermostat body and gently

pull it out from the bottom of the subbase and

pivot up. To attach the thermostat body, line up

the four terminal pins on the upper section of the

thermostat back with the matching connector on

the

the subbase. Insert these, then gently pivot the

thermostat body down to connect the eight pin

connectors on the lower portion of the thermo-

stat back. Gently push until the snap connectors

engage. DO NOT FORCE OR PRY THE THER-

MOSTAT as this may damage the unit.

Table of Contents