White Rodgers 1F94-71 Operation Manual page 32

4. Press and hold
periods and heating temperatures for Tues-
day.
5. Repeat steps 3 and 4 to review all remain-
ing days' programming. If you find an error
in any day's programming, go back to the
programming instructions to correct the error.
6. Press RUN .
PRGM
SYSTEM
7. Press until COOL is displayed.
SWITCH
8. Repeat steps 2 through 5 to check cooling
temperatures.
RUN
9. Press to begin program operation.
PRGM
32
VIEW
to view heating/cooling
PRGM
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
Press SYSTEM until OFF is displayed. Reattach
SWITCH
thermostat to subbase. Then press
select the operation mode you want (HEAT,
COOL, AUTO).
NOTE
When you have completed programming, you
may set option switch #3 (see TOTAL KEYPAD
LOCKOUT in the OPERATING FEATURES
section).
SYSTEM
to
SWITCH