White Rodgers 1F94-71 Operation Manual page 25

SET
5. Press once. The display will show the
CLOCK
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either
reach the current day of the week.
RUN
7. Press once. The display will show the
PRGM
correct time and room temperature alter-
nately.
Program Heating/Cooling Temperatures
During programming, if you don't press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume pro-
TIME or until you
TIME
FWD
BACK
gramming after this happens, press
you are at the point where you stopped program-
ming. hen you may continue to enter your pro-
gram normally. If you want to stop programming
at any time, simply press
gram operation.
SYSTEM
1. Press until HEAT is displayed.
SWITCH
VIEW
2. Press once. The display will continue
TEMP
to show HEAT. Below HEAT is the letter A,
representing the first programmed heating
temperature (HEAT A). At the right of the
display is the currently programmed HEAT
A setting.
3. Press either
temperature to your selected HEAT A set-
ting.
VIEW
until
PRGM
RUN
to resume pro-
PRGM
or to change the
25