Registers 40601 To 40626: Event Recorder ("Sequence Of Events") - Siemens SIPROTEC 7SJ80 Manual

1.6.7

Registers 40601 to 40626: Event recorder ("Sequence of Events")

Register
40601 No. of Event recorder entries
40602 "SOE_Control"
40603
40604
40605
Message block #1
40606
40607
-
40610
40611
40612
40613
Message block #2
40614
40615
-
40618
40619
40620
40621
Message block #3
40622
40623
-
40626
SIPROTEC Modbus - Bus mapping 7SJ80/7SK80/7RW80
C53000-L2240-A320-3
• Registers are write-protected (with the exception of "SOE_Control").
• Information regarding the handshake register, the data type "Message block" and
the evaluation of Event recorder entries you find in the manual "SIPROTEC
communication modules, Modbus - Communication profile" (ref. to page 3).
• Only the annunciation "Data invalid" (ref. to chap. 1.6.3) is routed by default to the
Event recorder.
Further annunciations can be added to the Event recorder using DIGSI (ref. to chap.
"Customization of the allocations" in the manual "SIPROTEC communication
modules, Modbus - Communication profile").
Designation
1. A write access is rejected with exception code 03 (ILLEGAL_DATA_VALUE).
Number of Event recorder entries which still were not read
Handshake register (read/write access)
Register type / Bit offset #1
Register address #1
Message cause / Indication type #1
Value #1
Time stamp #1
Register type / Bit offset #2
Register address #2
Message cause / Indication type #2
Value #2
Time stamp #2
Register type / Bit offset #3
Register address #3
Message cause / Indication type #3
Value #3
Time stamp #3
Modbus Register Map Organization
1
Comment
37