Modbus Register Map Organization
1.4
Input Status Registers (1X register)
1.4.1
Registers 10001 to 10024: User-defined annunciations
Register Designation of the SIPROTEC objects
10001
<user-defined>
10002
<user-defined>
10003
<user-defined>
10004
<user-defined>
10005
<user-defined>
10006
<user-defined>
10007
<user-defined>
10008
<user-defined>
10009
<user-defined>
10010
<user-defined>
10011
<user-defined>
10012
<user-defined>
10013
<user-defined>
10014
<user-defined>
10015
<user-defined>
10016
<user-defined>
10017
<user-defined>
10018
<user-defined>
22
The Input Status register block allows the Modbus master to scan the current status
of the input channels and the annunciations generated in the SIPROTEC device
(protection annunciations, status annunciations etc.).
Note:
• The allocation of the input channels to the binary inputs is defined during the
parameterization of the devices.
• Depending on the device composition and the existing protection packages, not all
of the indicated binary outputs or protection annunciations (and corresponding
Modbus registers) may be available in the SIPROTEC device.
• Protection annunciations, single-point indications and taggings can be routed on
these positions as a "Destination system interface" using the DIGSI
Configuration matrix.
Comment
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
SIPROTEC Modbus - Bus mapping 7SJ80/7SK80/7RW80
Internal
object
no.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
C53000-L2240-A320-3