6.4
Printing of the allocations on system interface
6.4.1 Configuration – complete (sorted by line)
Call
Contents
7SJ61/62/63, 6MD63, 7UM61 PROFIBUS-DP – Communication profile
C53000-L1840-B001-02
The allocations on system interface incl. the scalings adjusted at
measured values can be printed in two different views:
•
Configuration – complete (sortet by line),
•
Routing – short (column-oriented).
Menu item "File – Print" and selection of "Configuration – complete
(sorted by line)" in the "Print options" dialog window.
It is additional to select which information types (indications, commands
etc.) the printout shall contain and which information filtration is used
regarding the allocations.
Figure 6-4
Print option "Configuration – complete (sorted by line)"
The information – according to the selected information filtration (ref. to
Figure 6-4) - are listed with the associated properties and allocations in
the order of the lines of the DIGSI Configuration matrix.
Every chosen information type (indications, commands etc.) forms an
own chapter in the printout.
PROFIBUS-DP – Parameterization in DIGSI
6-11