Table of Contents
Advertisement
1
Bus specific parameters
Bus specific parameters
Slave address
Baud rate
PNO identification
number
DDB file / GSD file
Device name
Slave family
7SJ61/62/63, 6MD63, 7UM61 PROFIBUS-DP – Communication profile
C53000-L1840-B001-02
The following settings for the serial communication between the
PROFIBUS-DP master and the PROFIBUS-DP slave of the SIPROTEC
device have to be defined when programming the device.
The PROFIBUS-DP slave address of the SIPROTEC device is set using
the parameterization system DIGSI. Permissible slave addresses are in
the range between 1 and 126.
The PROFIBUS-DP slave of the SIPROTEC devices can communicate
in a PROFIBUS-DP net with one of the following baud rates:
9.6; 19.2; 93.75; 187.5; 500, 1500; 3000 and 6000 kB/s.
Note
•
At use of a SIPROTEC device with a PSO module the maximum
baud rate is 1500 kB/s (ref. to chap. 7.2).
•
The PROFIBUS-DP slave of the SIPROTEC devices supports
automatic baud rate recognition.
80A1
hex
„siem80A1.gsd"
„SIPROTEC4 DP-Modul"
Other field controller - SIPROTEC
1
1-1
Advertisement
Table of Contents
