Planning Program; Enter Heating Program; Entering Your Program - White Rodgers 1F80-361 Installation And Operation Instructions Manual

Planning Your Program Planning Your Program Planning Your Program Planning Your Program Planning Your Program
Look at the factory preprogrammed times and temperatures
shown in the sample schedule. If this program will suit your
needs, simply press the RUN button to begin running the factory
preset program.
If you want to change the preprogrammed times and tempera-
tures, follow these steps.
Determine the time periods and temperatures for your weekday
and weekend programs. You must program four periods for
both the weekday and weekend program. However, you may
use the same heating and cooling temperatures for consecutive
time periods. You can choose start times, heating tempera-
tures, and cooling temperatures independently for both week-
day and weekend programs (for example, you may select 5:00
AM and 70° as the weekday 1st period heating
temperature, and also choose 7:00 AM and 76° as the weekday
1st period cooling 1st period cooling
1st period cooling 1st period cooling start time and temperature). 1st period cooling
Use the following table to plan your program time periods and
the temperatures you want during each period. Fill in the
complete table to have a record of your programs.

Entering Your Program

Entering Your Program Entering Your Program Entering Your Program Entering Your Program
Follow these steps to enter the heating and cooling programs
you have selected.
Set Current Time and Day Set Current Time and Day Set Current Time and Day Set Current Time and Day Set Current Time and Day
1. Press TIME button once. The display will show the hour only.
EXAMPLE:
PM
2. Press and hold either
hour and AM/PM designation (AM
begins at noon).
3. Press TIME once. The display window will show the minutes
only.
EXAMPLE:
4. Press and hold either
minutes.
5. Press TIME once. The display will show the day of the week.
6. Press or until you reach the current day of the week.
7. Press RUN once. The display will show the correct time and
room temperature alternately.
Heating/Cooling Schedule Plan (Factory Program)
WEEKDAY (5 DAY)
Start
Period Time Temperature
1ST 6:00 AM 70°F
2ND 8:00 AM 62°F
3RD 5:00 PM 70°F
4TH 10:00 PM 62°F
1ST 6:00 AM 78°F
2ND 8:00 AM 85°F
3RD 5:00 PM 78°F
4TH 10:00 PM 82°F
1st period heating 1st period heating 1st period heating start time and 1st period heating
or until you reach the correct
AM AM AM begins at midnight; PM
AM
or until you reach the correct
SAMPLE
SATURDAY (1 DAY) SUNDAY (1 DAY)
Start Start
Time Temperature Time Temperature
6:00 AM 70°F 6:00 AM
8:00 AM 62°F 8:00 AM
5:00 PM 70°F 5:00 PM
10:00 PM 62°F 10:00 PM
6:00 AM 78°F 6:00 AM
8:00 AM 85°F 8:00 AM
5:00 PM 78°F 5:00 PM
10:00 PM 82°F 10:00 PM

Enter Heating Program

Enter Heating Program
Enter Heating Program Enter Heating Program Enter Heating Program
1. Move the SYSTEM switch to HEAT
2. Press PRGM once. "MO TU WE TH FR
day program) will appear in the display. Also displayed are
the currently programmed start time for the 1st heating
period and the currently programmed temperature (flash-
ing).
MO TU WE TH FR
EXAMPLE:
This display window shows that for the 1st weekday period,
the start time is 6:00 AM, and 68° is the programmed
temperature (this example reflects factory preprogramming).
3. Press or
your selected temperature for the 1st heating program
period.
4. Press TIME once (the programmed time will flash). Press
or until your selected time appears. The time will
change in 15 minute increments. When your selected time
is displayed, press TIME again to return to the change
temperature mode.
5. Press PRGM once. The currently programmed start time
and setpoint temperature for the 2nd heating
period will appear.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for the 2nd heating program period.
7. Repeat steps 3 through 5 for the 3rd and 4th heating
program periods. Weekday heating programs are now com-
plete.
8. Press PRGM once. "SA
appear in the display, along with the start time for the 1st
heating period and the currently programmed temperature.
PM PM PM
PM
9. Repeat steps 3 through 7 to complete Saturday heating
programming.
10.Press PRGM once. "SU
appear in the display, along with the start time for the 1st
heating period and the currently programmed temperature.
11.Repeat steps 3 through 7 to complete Sunday heating
programming.
12.When you have completed entering your heating program,
press RUN.
WEEKDAY (5 DAY)
Start
Period Time
1ST
70°F
2ND
62°F
3RD
70°F
4TH
62°F
1ST
78°F
2ND
85°F
3RD
78°F
4TH
82°F
6
HEAT. HEAT HEAT HEAT
MO TU WE TH FR MO TU WE TH FR
MO TU WE TH FR" (indicating week- MO TU WE TH FR
AM
to change the displayed temperature to
2nd heating 2nd heating 2nd heating program
2nd heating
SA SA SA SA" (indicating Saturday program) will
SU SU SU" (indicating Sunday program) will SU
Heating/Cooling Schedule Plan
SATURDAY (1 DAY)
Start
Temperature Time Temperature
1st heating 1st heating 1st heating 1st heating
SUNDAY (1 DAY)
Start
Time Temperature