Sign in today to find solutions:

Don't have an account? Sign up

White Rodgers 1F80-261 Installation And Operation Instructions Manual

White rodgers installation and operation instructions programmable electronic digital thermostat 1f80-261.

 
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
Your new White-Rodgers 5-Day/1-Day/1-Day Digital Thermo-
stat uses the technology of a solid-state microcomputer to
provide precise time/temperature control. This thermostat offers
you the flexibility to design heating and cooling programs that fit
your needs.
Features:
Features:
Features:
Features:
Features:
• Separate 5-day (weekday), 1-day (Sat) and 1-day (Sun) pro-
gramming with four separate time/temperature periods per day
• Simultaneous heat and cool program storage
• Preprogrammed temperature control
• Backlit display
• LCD continuously displays setpoint, and alternately dis-
plays time and room temperature
This thermostat is intended for use with a low voltage system; do
not use this thermostat with a line voltage system. If in doubt
about whether your wiring is millivolt, line, or low voltage, have
it inspected by a qualified heating and air conditioning contractor
or electrician.
Do not exceed the specification ratings.
All wiring must conform to local and national electrical codes and
ordinances.
This control is a precision instrument, and should be handled
carefully. Rough handling or distorting components could cause
the control to malfunction.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
!
To prevent electrical shock and/or equipment damage,
To prevent electrical shock and/or equipment damage,
To prevent electrical shock and/or equipment damage,
To prevent electrical shock and/or equipment damage,
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
disconnect electric power to system at main fuse or
disconnect electric power to system at main fuse or
disconnect electric power to system at main fuse or
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
circuit breaker box until installation is complete.
circuit breaker box until installation is complete.
circuit breaker box until installation is complete.
circuit breaker box until installation is complete.
ELECTRICAL DATA
ELECTRICAL DATA
ELECTRICAL DATA
ELECTRICAL DATA
ELECTRICAL DATA
Electrical Rating:
Electrical Rating:
Electrical Rating:
Electrical Rating:
Electrical Rating:
8 to 30 VAC 50/60 Hz. or D.C.
0.05 to 1.0 Amps (Load per terminal)
1.5 Amps Maximum Total Load
1.5 Amps Maximum Total Load
1.5 Amps Maximum Total Load
1.5 Amps Maximum Total Load
1.5 Amps Maximum Total Load (All terminals combined)
THERMAL DATA
THERMAL DATA
THERMAL DATA
THERMAL DATA
THERMAL DATA
Setpoint Temperature Range:
Setpoint Temperature Range:
Setpoint Temperature Range:
Setpoint Temperature Range:
Setpoint Temperature Range:
45°F to 90°F (7°C to 32°C)
Operating Ambient Temperature Range:
Operating Ambient Temperature Range:
Operating Ambient Temperature Range:
Operating Ambient Temperature Range:
Operating Ambient Temperature Range:
32°F to 105°F
Operating Humidity Range:
Operating Humidity Range:
Operating Humidity Range:
Operating Humidity Range:
Operating Humidity Range:
0 to 90% RH (non-condensing)
Shipping Temperature Range:
Shipping Temperature Range:
Shipping Temperature Range:
Shipping Temperature Range:
Shipping Temperature Range:
-4°F to 149°F
WHITE-RODGERS
WHITE-RODGERS
WHITE-RODGERS
WHITE-RODGERS
WHITE-RODGERS
EMERSON ELECTRIC CO.
9797 REAVIS ROAD
ST. LOUIS, MISSOURI 63123-5398
www.white-rodgers.com
1F80-261
1F80-261
1F80-261
1F80-261
1F80-261
Programmable Electronic Digital Thermostat
INSTALLATION AND
INSTALLATION AND
INSTALLATION AND
INSTALLATION AND
INSTALLATION AND
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
• Temperature override until next program period
• Manual program override (HOLD temperature)
• Temporary HOLD
• °F/°C convertibility
• Temperature range 45° to 90°F
• RC, RH, C, W, Y, G , O and B terminals
• Optional C terminal (Dual Power option)
• B and O terminals for single stage heat pumps (no auxiliary
heat) or damper operation
• Program storage in case of power loss
®
• 2 "AA" Energizer
alkaline batteries included
WARNING
WARNING
WARNING
WARNING
WARNING
!
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
shock or fire hazard.
shock or fire hazard.
shock or fire hazard.
shock or fire hazard.
shock or fire hazard.
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
property damage.
property damage.
property damage.
property damage.
property damage.
Thermostat installation and all components of the
Thermostat installation and all components of the
Thermostat installation and all components of the
Thermostat installation and all components of the
Thermostat installation and all components of the
system shall conform to Class II circuits per the NEC
system shall conform to Class II circuits per the NEC
system shall conform to Class II circuits per the NEC
system shall conform to Class II circuits per the NEC
system shall conform to Class II circuits per the NEC
code.
code.
code.
code.
code.
APPLICATIONS
APPLICATIONS
APPLICATIONS
APPLICATIONS
APPLICATIONS
For use with:
• Standard heat/cool or heat only systems
• Electric heat systems
• Gas or oil fired systems
• Gas systems with intermittent ignition devices (I.I.D.)
and/or vent dampers
• Hydronic (hot water or steam) systems
• Single-stage heat pump systems (no auxiliary heat)
• Millivolt systems
DO NOT USE WITH:
DO NOT USE WITH:
DO NOT USE WITH:
DO NOT USE WITH:
DO NOT USE WITH:
• Multi-stage systems
• Systems exceeding 30 VAC and 1.5 amps
• 3-wire zoned hydronic heating systems
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
PART NO. 37-6288B
PART NO. 37-6288B
PART NO. 37-6288B
PART NO. 37-6288B
PART NO. 37-6288B
Replaces 37-6288A
0449
Next page ->

Summary of Contents

  • Page 1

    Shipping Temperature Range: -4°F to 149°F WHITE-RODGERS WHITE-RODGERS WHITE-RODGERS WHITE-RODGERS WHITE-RODGERS EMERSON ELECTRIC CO. 9797 REAVIS ROAD ST. LOUIS, MISSOURI 63123-5398 www.white-rodgers.com 1F80-261 1F80-261 1F80-261 1F80-261 1F80-261 Programmable Electronic Digital Thermostat INSTALLATION AND INSTALLATION AND INSTALLATION AND INSTALLATION AND INSTALLATION AND...

  • Page 2

    INSTALLATION INSTALLATION INSTALLATION INSTALLATION INSTALLATION REMOVE OLD THERMOSTAT REMOVE OLD THERMOSTAT REMOVE OLD THERMOSTAT REMOVE OLD THERMOSTAT REMOVE OLD THERMOSTAT 1. Shut off electricity at the main fuse box until installation is complete. Ensure that electrical power is disconnected. 2. Remove the front cover of the old thermostat. With wires still attached, still attached, still attached,...

  • Page 3

    C ‡ Heating Relay System NOTE For 2-wire Heat only, attach to RH and W Figure 2. Typical wiring diagram for heat only, 3-wire, single transformer systems C ‡ Cooling System Relay Figure 3. Typical wiring diagram for cool only, 3-wire, single transformer systems NOTE RED jumper wire (provided with thermostat) must be connected between thermostat RH and RC terminals...

  • Page 4

    OPERATION OPERATION OPERATION OPERATION OPERATION Before you begin programming your thermostat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. Your thermostat con- sists of two parts: the thermostat cover thermostat cover thermostat cover thermostat cover...

  • Page 5

    Step Press Button(s) Displayed (Factory Default) PRGM and RUN HOLD* HOLD* HOLD* HOLD* HOLD* HOLD* HOLD* * Press HOLD to advance to next item or TIME to move backwards to previous item 4) 4) 4) 4) 4) Select Energy Management Recovery OFF or ON Select Energy Management Recovery OFF or ON Select Energy Management Recovery OFF or ON Select Energy Management Recovery OFF or ON -...

  • Page 6

    Planning Your Program Planning Your Program Planning Your Program Planning Your Program Planning Your Program Look at the factory preprogrammed times and temperatures shown in the sample schedule. If this program will suit your needs, simply press the RUN button to begin running the factory preset program.

  • Page 7

    CHECK YOUR PROGRAMMING CHECK YOUR PROGRAMMING CHECK YOUR PROGRAMMING CHECK YOUR PROGRAMMING CHECK YOUR PROGRAMMING Follow these steps to check your thermostat programming one final time before beginning thermostat operation. HEAT HEAT 1. Move SYSTEM switch to HEAT HEAT position. HEAT 2.

  • Page 8

    TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING Symptom Symptom Symptom Symptom Symptom Heat, Cool or Fan Runs Constantly. Heat, Cool or Fan Runs Constantly. Heat, Cool or Fan Runs Constantly. Heat, Cool or Fan Runs Constantly. Heat, Cool or Fan Runs Constantly. Furnace Cycles Too Fast or Too Slow Furnace Cycles Too Fast or Too Slow Furnace Cycles Too Fast or Too Slow...

Comments to this Manuals

Symbols: 0

Latest comments:

  • angelineprincess5 Jan 15, 2014 08:47:
    I want to thank you for sharing this great info! Very informativ​e and helpful stuff indeed.

    &​lt;a href="​;http://ww​w.cambridg​eheat.com/​">​Heating and cooling Mississaug​a</a>​;
  • de la boursodiere andrĂ© Dec 16, 2013 03:17:
    l'affichag​e de la tempĂ©ratu​re demander n apparait pas comme il se doit je voie des moitie de chiffre et seulement une Bar
  • arissa165 Nov 11, 2013 05:04:
    its nice info and useful info thanks for this affective info... heating and cooling toronto


    ​<a href="​;http://co​smopolitan​mechanical​.ca/"​>heatin​g and cooling product<​;/a>
×

Select the desired size and copy embed code

Copy your embed code and put on your site: