Samsung OfficeServ 7200 Technical Manual page 73

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

OfficeServ 7200

TECHNICAL MANUAL

7.1.8 Connecting KDB-D/KDB-S

KDB-D and KDB-S are modules installed on a digital phone connected to the

OfficeServ 7200 system. The KDB module enhances the functions of the phone and

increases the number of local ports according to module types.

Caution for connecting KDB module

KDB-D and KDB-S is only for a digital phone connected to the 8DLI board, not

for a digital phone connected to a 16DLI2 board.

• Place the keyset face down on a flat surface.

• Remove the base pedestal by placing your thumbs over the

attachment clips and press outward while simultaneously pressing

down on the keyset body with your fingertips.

Figure 7.12 Adding an iDCS Keyset Daughterboard Module

iDCS KDB-DIGITAL LINE INTERFACE (FKDBD)

This is a daughterboard that can be installed only in the 18 or 28 button keyset. The

FKDBD will provide one additional DLI circuit for the connection of any digital station

device such as a keyset, add-on module or DPIM. This FKDBD will only operate when

the keyset is connected to an 8 port DLI card so it can use the second B channel. Each

port on this card is intended for connection to one telephone. Connecting multiple

SECURING

SCREWS

REMOVE

KNOCKOUTS

7.8

Table of Contents

Home Page

INSTALLATION

PART 7 SEPTEMBER 2005

Table of Contents