Samsung OfficeServ 7200 Technical Manual page 69

OfficeServ 7200
TECHNICAL MANUAL
CONNECTING TO 8COMBO BOARD
Connect a digital phone to the 8COMBO board by using a twisted pair of AWG #24 or
AWG #26 wires.
Pin No.
Function
7.1.4 Connecting an IP Phone
Refer to the ITP-5021D Keyset User Guide for information on connecting IP keysets.
7.1.5 Connecting Boards to Ethernet
WIM/LIM/4DSL/MGI/MCP/SVMi-20E boards can be connected to Ethernet by using an
Ethernet cable.
• WIM board-DMZ, LAN, WAN1 and WAN2 port
• LIM board-all ports(P1 through P16)
• 4DSL board-Up Link port(LAN)
• MCP , MGI and SVMi-20E boards-LAN port
Pin No.
WIM/MCP/MGI/
SVMi-20E/4DSL
LIM
1 2 3
- - - DLI TIP
Figure 7.6 RJ-45 Port of the 8COMBO Board (For Digital Phone)
1 2 3
Tx+ Tx- Rx+
Rx+ Rx- Tx+
Figure 7.7 RJ-45 Port of Boards for Ethernet
7.4
Home Page
PART 7 SEPTEMBER 2005
D1~D8
Port
(RJ-45)
4 5 6
DLI RING -
RJ-45 port
4 5 6
- - Rx-
- - Tx-
Table of Contents
INSTALLATION
7 8
- -
7 8
- -
- -