Ignition/Light Switch; Lift Handle - White Outdoor Z - 180, Z - 180L, Z - 200 Operator's Manual

IGNITION/LIGHT SWITCH

The ignition/light switch is located on the Right Control Panel and is used to start the engine. It is a four position
switch.
• In the OFF position the engine is not running. (See Figure 5)
• In the ON/LlGHT position the engine is running and the Head Light is on.
• In the ON position the engine is running and the head light is off.
• In the START position the starter is engaged to the engine flywheel.

LIFT HANDLE

The Lift Handle is located on the right fender. It raises and lowers the cutting height of the mower deck used by
the Z-series. (See Figure 3) & (See Figure 6)
• 1 through 7 (1 - lowest height, 7 - highest height)
• L is the lock out position. The lock position is used when removing the mower deck.
The Choke Lever is located on the Left Control Panel. (See Figure 7) The Choke Lever is operated manually.
Having the Choke Lever in the ON position helps the engine to start during initial start-up. During normal
operation the Choke Lever should be in the OFF position.
The Throttle Lever is also located on the Left Control Panel and it is used to regulate the engine speed. To get
maximum efficiency from cutting, the throttle should be in the FAST position when operating the mower.
(See Figure 7)
Height
Positions
1 through 7
and L (lock)
Figure 5
Figure 6
8
Off
On/Light
On
Start
Button