Checking The Hydraulic Oil - White Outdoor Z - 180, Z - 180L, Z - 200 Operator's Manual

CHECKING THE HYDRAULIC OIL

Knurled Area
1. Flip seat up. (See Figure 15)
2. Clean the area around the Hydraulic Oil Dipstick to prevent debris from entering the crankcase.
3. Wipe clean and fully insert the fill plug/dipstick (screw in).
4. Remove the hydraulic fill plug/dipstick and read the level:
If hydraulic oil level is:
Inside operating range
Below operating range
Above operating range
5. Reinstall the dipstick completely into the fill tube.
WARNING:
Release Bar
Hydraulic Fill Plug/
Dipstick
Operating
=
Range
Never check for hydraulic leaks with your bare hand. Always use a rag.
Hydraulic Fill Point
Figure 15
Then:
Do nothing.
Add hydraulic oil before operating.
Check for leaks.
Drain excess oil before operating.
26