Table of Contents
Advertisement
SECTION 4: CONTROLS
PTO Switch
Ignition/Light Switch
Hour/RPM Meter
HOUR/RPM METER
The hour/RPM meter is an LCD (liquid crystal display) display that is located on the right control panel. The
meter's display stays on continuously. (See Figure 3)
• HOUR METER: The meter functions as an hour meter. The hour value is the number of hours of engine
operation. Use the hour value to determine when maintenance is required and to cost jobs.
• RPM METER: When the engine is on, the meter functions as an engine RPM gauge.
IGNITION/LIGHT SWITCH
The ignition/light switch is located on the right control panel and is used to start the engine. It is a four position
switch. (See Figure 4)
• In the OFF position the engine is not running.
• In the ON/LlGHT position the engine is running and the head light is on.
• In the ON position the engine is running and the head light is off.
• In the START position the starter is engaged to the engine flywheel.
Lift Handle
Front
Figure 3
Figure 4
7
Right Control
Panel
Off
On/Light
On
Start
Advertisement
Table of Contents
