Controls - White Outdoor HW-615 Operator's Manual

21” mulching push mower
Table of Contents

Advertisement

Attaching Discharge Chute
Your lawn mower was shipped as a mulcher. Remove the mulching cover and attach the side-discharge chute for
discharging grass clippings.
• Remove three plastic wing nuts holding the mulching cover to the deck. See Figure 6A. Keep the cover in a
safe place for future use. Save the wing nuts.
• Place the side-discharge chute on the deck (in place of the mulching cover) so that the top flange on the
discharge chute goes under the top edge of the opening on the deck. See Figure 6B.
• Align the three slots on the chute with the hardware slots on the deck.
• Secure with the wing nuts earlier removed. Tighten the wing nuts.
A
IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. Be certain to service engine with gasoline and oil
as instructed in the separate engine manual before operating your mower.
SECTION 7: CONTROLS
Read this operator's manual and safety rules before operating your lawn mower. Compare the illustrations in Figure 7
with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for
future reference.
The operation of any lawn mower can result in foreign objects being thrown into the operator's eyes thus causing
severe eye damage. Always wear safety glasses while operating the mower, or while performing any adjustments or
repairs on it.
Recoil Starter
Mulching
Cover
Discharge
Chute
B
Mulching
Cover
Top Flange
goes under
top edge of
opening on deck
FIGURE 6
Blade Control Handle
Engine
Caster Lock
Spark Plug
FIGURE 7
9
Side-Discharge
Chute
Align the slot
here (only two
shown)
Oil Fill
Gas Tank
Plug
Throttle
Control
Primer

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents