Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Post
Handle
1.
Take a Post and face the ratchet
edge toward the front of the Base.
The Pawl is on the front.
2.
Lift the Handle and lower the
Post into the Base. Make sure
it is completely lowered.
CAUTION! Be alert to pinching
danger when lowering the Post.
Item 56368 56371
Pawl
(not shown)
Base
For technical questions, please call 1-888-866-5797.
3.
On the opposite side of the
Handle there is a tab on the Base.
Using a small punch and hammer
(sold separately), bend the tab in.
Bend the tab in enough to keep the
Post from coming out of the Base.
WARNING! Before using the Jack
Stands, make sure the Post cannot
be pulled up and out of the Base.
4.
Repeat Steps 1 through 3 above
with the other Jack Stand.
Tab
Page 3