Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18k
Advertisement
Table of Contents
Related Manuals for Pittsburgh 64908
Summary of Contents for Pittsburgh 64908
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
10. Do not adjust safety valve. 11. Wear ANSI-approved safety goggles and heavy-duty work gloves during use. 12. Keep clear of load while lifting and lowering. 13. Lower load slowly. Page 2 For technical questions, please call 1-888-866-5797. Item 64908... -
Page 3: Specifications
Maximum Height 12-3/4″ Minimum Height 5-3/8" Jack Components Saddle Lifting Arm Handle Oil Fill Screw Socket (Not Shown) Release Valve Handle Figure A Handle Socket Oil Fill Screw Hydraulic Unit Figure B Item 64908 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Setup And Operation
2. Add qualified hydraulic oil of high grade 3. Replace the Fill Screw. into the Fill Screw opening slowly until the oil reaches the top of the oil fill hole. Page 4 For technical questions, please call 1-888-866-5797. Item 64908... - Page 5 3. Put the Handle on the Release Valve and slowly turn the Handle counterclockwise (never more than 1/2 full turn) to lower the vehicle onto the ground. Item 64908 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Troubleshooting
Check the oil level and refill if needed. Jack may require bleeding - see instructions on page 4. Unit may have too much hydraulic oil inside, check fluid level and adjust if needed. Page 6 For technical questions, please call 1-888-866-5797. Item 64908... -
Page 7: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 64908 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.