Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pittsburgh Manuals
  4. Jacks
  5. 57047
  6. Owner's manual & safety instructions

Pittsburgh 57047 Owner's Manual & Safety Instructions

Z ton low profile floor jack
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Item
Weight Capacity
Maximum Height
Minimum Height
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
57047
2 Tons (4,000 lb.)
16-7/8"
3-3/8"
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19j

Advertisement

loading

Related Manuals for Pittsburgh 57047

Summary of Contents for Pittsburgh 57047

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Item 57047 Weight Capacity 2 Tons (4,000 lb.) Maximum Height 16-7/8"...

  • Page 2: Table Of Contents

    If it does not work properly, bleed air from its 12. Keep clear of load while lifting and lowering. hydraulic system as stated on page 4. 13. Lower load slowly. SaVE tHESE InStructIOnS. Page 2 For technical questions, please call 1-888-866-5797. Item 57047...

  • Page 3: Safety

    Saddle Oil Fill Screw (Not Shown) Lifting Arm Handle Socket U-Joint Safety Valve Cover Rear Caster DO NOT OPEN OR ADJUST U-Joint (Not Shown) Fill Screw Hydraulic Unit Figure a Item 57047 For technical questions, please call 1-888-866-5797. Page 3...

  • Page 4: Operation

    2. Add high grade hydraulic fluid into the Fill Screw slowly until the oil reaches the top of the oil fill hole. 3. Replace the Fill Screw. Page 4 For technical questions, please call 1-888-866-5797. Item 57047...
  • Page 5 5. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. Item 57047 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Maintenance

    Jack may be low on oil. Check the oil level and refill if needed. Jack may require bleeding - see instructions on page Bleeding on page 4. Unit may have too much hydraulic oil inside, check fluid level and adjust if needed. Page 6 For technical questions, please call 1-888-866-5797. Item 57047...

  • Page 7: Parts List And Assembly Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 57047 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Warranty

    pLEaSE rEaD tHE FOLLOWInG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.