Samsung Multifunction MultiXpress X322 Series User Manual page 161

Scanning and sending to USB /shared folder
Output tab
• Quality: Adjusts the display quality of the scanned output.
• File Format: Selects the file format of the scan output.
• Filing Policy: Automatically renames or overwrites when the USB memory
device has a file with same name.
12
Scanning to a USB /shared folder
• To use Scan to USB feature: Insert a USB memory device into the USB
memory port on your machine.
• To use Scan to shared folder feature: Install the mass storage device (hard
disk) device.
Place the originals face up in the RADF or place a single original face
1
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
2 Press Scan to USB or Scan to Shared Folder from the display screen.
3 Press the Basic tab.
4 Select a folder for storing the scanned image. If you do not select a folder,
the scanned image is stored in root directory.
5 Press the File Name input area. The pop-up keyboard appears.
6 Enter a file name to store the scan data. Press Done.
7 Set the File format, Resolution, and Darkness.
8 Set the scan features in the Advanced, Image, or Output tabs, if
necessary (see "Changing the scan feature settings" on page 162).
Press the (Start) button to scan and store the file.
9
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
161
7. Scanning