Samsung Multifunction MultiXpress X322 Series User Manual page 100

Opening printing preferences
6
Finishing tab
Sort Options
This option allows you to sort out the printouts easily.
• None: Disables this option.
• Offset: When printing multiple copies, this option shifts the output position
of each set.
This feature is available only when the Finisher is installed.
• Rotate: When printing multiple copies, the printouts are stacked criss-
crossed in sets.
• This feature is available only when the standard or booklet finisher is not
installed.
• This feature is available only with Letter- and A4-sized print media.
• Before using this feature, you have to load the paper in the trays with SEF
(Short edge feed) and LEF (Long edge feed). For example, direction of
paper feeding in the tray 1 is SEF, and direction of paper feeding in the
tray 2 is LEF.
Staple Options
This option allows you to specify the number of staples and the staple position.
This option is available only when the optional finisher is installed.
Hole Punch Options
This option allows you to specify the number of holes to punch and the
punching position. This option is available only when the optional punch kit is
installed in the optional finisher.
Output Tray Options
This option allows you to specify the tray where to output the printed
documents (see "Tray Settings" on page 89).
7
Advanced tab
Use the Advanced tab to set various printing options.
100
5. Printing