Select A Location; Connect The Cables - Sonos Sub User Manual

SONOS USER GUIDE

Select a location

You can mount Beam to a wall above or below your TV or place it on a credenza.
Place on a credenza
• Place horizontally on a stable and level surface at least 2" (50mm) from the TV.
• Don't place vertically or on its side.
• Don't block the TV's IR sensor.
• If put on a shelf, place at the front and keep 2" (minimum) clearance on both sides for best sound quality.
• Keep 1" (25mm) space (minimum) above Beam so you can reach the touch controls.
• For best sound quality, keep both ends of Beam at least 1' (30cm) from a wall or other obstruction.
Wall mount
To put Beam on a wall, see Wall mount.

Connect the cables

Before you start
Disconnect existing home theater or surround sound equipment from your TV.
1.
Connect any external devices, like a cable box or DVD player, directly to your TV.
2.
Connect the power cord
Insert the power cord firmly into Beam's AC (mains) power port until it is fully connected.
1.
Power port
Plug the other end of the power cord into an AC (mains) power source.
2.
Caution: Use only the supplied power cord (using a third-party power cord will void your warranty).
Connect Beam to your TV
Use the HDMI cable to connect the soundbar to your TV. You may need the optical adapter too (the app lets
you know).
Fully insert the HDMI cable into Beam's HDMI port.
1.
Connect the HDMI cable to your TV. You have two choices:
2.
Power cord
HDMI port
HDMI cable