Carrier RG66B3/BGEF Owner's Manual page 4

Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its
remote control. The following is a brief introduction to the remote control itself. For instructions
on how to operate your air conditioner, refer to the How to Use The Basic/Advance Functions
section of this manual.
NOTE Please do not select HEAT mode if the machine you purchased is cooling only type.
Heat mode is not supported by the cooling only appliance.
ON/OFF
Turns the unit on or off
MODE
Scrolls through operation
modes as follows:
AUTO → COOL → DRY
→ HEAT → FAN
ECO/SLEEP
Starts and stops energy
efficient feature. If hod
down this button for more
than 2 seconds, the sleep
feature is activated.
TIMER
Sets timer to turn unit
on and off (see How to
Use Basic Functions for
instructions)
LED
Turns indoor unit's LED
display on and off.
FOLLOW ME
Temperature sensing and
room temperature display
button.
TURBO/FRESH
Enables unit to reach
preset temperature in
shortest possible time.
If hold down this button
for 2 seconds, the Fresh
feature is activated.
Mode ON/OFF
Timer Timer
Follow
LED
me
Turbo
Fresh
INTELLIGENT EYE
Detects the people activities
in the room.
Model: RG66B4(2H)/BGEF
3
FAN
Selects fan speeds in the
following order:
AU% → 20% → 40% →
60% → 80% → F% (100%).
Press the Adjust
button to increase/decrease
the fan speed in 1%
increments.
TEMP
Increases temperature in
1 °F (0.5 °C) increments
for each press. If pressing
and holding down this
Fan
button, the temperature
will increase in 1 °F (1 °C)
increments.
Max. Temperature is 86 °F
(30 °C).
TEMP
Decreases temperature in
1 °F (0.5 °C) decrements
for each press. If pressing
Self
and holding down this
clean
button, the temperature
will decrease in 1 °F (1 °C)
decrements.
Min. temperature is 60 °F
(16 °C).
SWING
Starts and stops horizontal
louver movement.
SWING
Starts and stops vertical
louver movement.
SELF CLEAN
Starts and stops the unit self
clean feature.
+ –
or
+
–