Dynamic Hsl-3 8/40 Anchor Procedure - Life Fitness Synrgy 180 Owner's Manual

Dynamic HSL-3 8/40 Anchor Procedure

1. Place unit into position to be mounted.
2. Wearing protective glasses, drill down into
flooring perpendicularly to the required depth,
ensuring that the foot thickness is being ac-
counted for; refer to Anchor Selection and Foot
Dimensions Section.
3. Clear out the debris from hole, insert fastener
and hammer into hole until flush against frame
plate.
4. Tighten to 18 Foot-Pounds (24Nm).
NOTE: If the legs/frame do not contact the mount-
ing surface DO NOT pull down with the fastener or
anchor. Loosen frame hardware and re-tighten to
allow machine to align.
33