How To Perform A Nozzle Check - Ricoh Ri 100 Quick Installation Manual

Hide thumbs Also See for Ri 100:

How to perform a nozzle check

1) Tape a piece of standard size paper (8 ½" X 11") to the

cassette.

2) Press the Menu button on the control panel

3) Press the up or down arrow keys on the control panel until

Maintenance appears in the display

4) Press the # (Enter) Key on the control panel

5) Press the up or down arrow keys on the control panel until

Nozzle Check appears on the display.

6) Press the # (Enter) Key on the control panel

7) Press the Start Key on the control panel will print. Pressing

the escape key will get out of the menu options

If some of the horizontal lines in the pattern are missing you

may need to perform a head clean. To do this:

When in the Maintenance menu (steps 2-4 above)

1) Press the up or down arrow keys on the control panel

until Head cleaning appears on the display.

2) Press the # (Enter) Key on the control panel

3) Press the up or down key to select all heads, head 1 or

head 2.

4) Press the # (Enter) Key – Press the # (Enter) key again to

start the cleaning.

Table of Contents