Sony BRS-200 Quick Reference Manual page 8

Sony Corporation
Printed in Japan
3
Turn the F3 control to select "Auto" under "MODEL."
4
Press the F4 control to confirm the settings selected in steps 2 and 3.
After the settings are changed, the message "Reboot system? [PAGE] (yes) or
[EXIT] (no)" appears on the display panel. Press the PAGE button. The
switcher will reboot and operate with the changed settings.
If the images from the two cameras are displayed on the monitor, the setup is
successful and completed.
PVW
CAM1
Image from the camera
connected to the SDI IN 1
connector
PGM
CAM2
Image from the camera
connected to the SDI IN 2
connector