Uniden BCD396T Manual page 13

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
shows the name of the currently scanned system in Scan Mode.
shows the name of the currently searched custom/service search in Search Mode.
will alternate the system name and channel group name for a system in Receiving or Hold Modes.
will alternate the custom search name and system name for a trunking system for a 'C-Ch only Search' in Receiving or Search Hold Modes in text display mode.
will alternate the custom search name and 'SID' for a trunking system for a 'C-Ch only Search' in Receiving or Search Hold Modes in ID/frequency display mode.
3rd Line
will scroll 'SCAN' (for a conventional system), 'ID SCAN', or 'ID SEARCH' (for a trunked system) and show an up or down arrow to indicate the scan direction in Scan
Mode.
will scroll the search frequency range/channels and an up or down arrow to show the scan direction in Search Mode.
shows the frequency or ID (or text tag if programmed) for a channel in Receiving or Scan Hold Modes.
shows the search frequency (and the channel number for CB, Rail, and FRS/GMRS/MURS service searches) in Receiving or Search Hold Modes.
shows the ID (with C-Ch only on) in Receiving or Search Hold Modes.
will scroll SEARCH in Close Call Only Mode.
4th Line
appears when receiving a conventional priority channel in Receiving or Hold Modes.
shows the acquired control channel frequency of a trunking system in Scan Mode.
shows the modulation and attenuation (if on) of a non-acquired trunked system in Scan Mode.
shows the voice channel of a trunked system in Receiving or Hold Modes.
shows the receive modulation of the conventional channel in Receiving or Hold Modes.
shows the receive modulation of the custom/service search in Search Mode.
appears if the channel/search is attenuated in Receiving or Hold Modes.
ATT
shows the tone code (if received) for a conventional frequency if programmed and blinks in CTCSS/DCS search mode in Receiving or Hold Modes.
appears if the channel is receiving digitalized voice in Receiving or Hold Modes.
P25
LNK appears if the channel is receiving data in Receiving or Hold Modes.
appears if the control channel is being received in Receiving or Hold Modes.
DAT
appears if the channel is receiving encrypted voice in Receiving or Hold Modes.
ENC
shows the trunking activity indicators (when scanning a trunked system) for 10 seconds when Vol is pressed in Scan Mode.
5th Line
S0-9: shows the first digit of (systems assigned to) the currently scanned quick key on the left with the blinking second digit (1-0) on the right in Scan or Receiving
Modes.
In Hold Mode, only (systems assigned to) the current quick key appears.
a non-blinking number on the right indicates the quick key is enabled waiting to be scanned.
a - (dash) means nothing is assign to the quick key.
an * (asterisk) means the quick key is turned off.
will appear if the Close Call 'Priority' feature is on in Any Mode except Tone-out.
will appear if the Close Call 'Do-Not-Disturb' feature is on in Any Mode except Tone-out.
appears if one or more broadcast/custom screen bands is turned on in Receiving or Search Modes.
SCR
appears if repeater reverse is turned on in Receiving or Search Modes.
REP
shows the volume level is ready to adjust if you press Vol.
shows the squelch is ready to adjust if you press and hold Func then Vol.
6th Line
GRP shows the group quick keys (1-0) for each system with (groups assigned to) the currently scanned quick key blinking in Scan or Receiving Modes.
In Hold Mode, only (groups assigned to) the current quick key appears.
a non-blinking number on the right indicates the quick key is enabled waiting to be scanned.
a - (dash) means nothing is assign to the quick key.
an * (asterisk) means the quick key is turned off.
http://marksscanners.com/396/396.shtml (13 of 51)8/17/2010 10:11:40 PM