Uniden BCD396T Manual page 10

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
Scroll Control, Press to select a menu item or save an entry in Menu Mode.
Sql, Vol
Press then turn to adjust volume level in Scan Mode.
Press to view battery info in Scan Mode.
Press to view trunking activity indicators for a trunked system in Scan Mode.
Turn to select scan/search direction and to continue scan/search in Scan/Search Modes.
Turn to select channel or frequency in Scan/Search Hold Modes.
Turn to scroll to a menu item in Menu Mode.
Turn to select Tone-outs in Tone-out Mode.
Turn to select characters when editing text.
Press and hold Func then Vol once to adjust squelch in Scan Mode.
Press and hold Func then Vol twice to view the APCO threshold display in Scan Mode.
Turn to adjust the digital decode threshold in Threshold Settings Mode.
Press and hold Func then Vol 3 times to view the AGC menu in Scan Mode.
Press and hold Func then turn Vol to select AGC settings in Scan Hold Mode.
Turn to adjust AGC settings in AGC Settings Mode.
Menu
Press to enter menu mode.
Press to return to previous menu.
Press and hold Func then Menu to go to the 'Edit' menu for the current system in Scan Mode.
Press and hold Func then Menu to go to the 'Search for...' menu in Search Mode.
Press and hold Func then Menu to go to the 'Close Call' menu in Close Call Only Mode.
Press and hold Func then Menu to go to the 'WX Operation' menu in Any Weather Mode.
Press and hold Func then Menu to go to the 'Tone-out for...' menu in Tone-out Mode.
Func Press and hold to enter Function mode.
Hold/
Press to hold on a channel, frequency, search, Close Call hit, or Tone-Out search. Press again to resume.
Press to recall the last Close Call Hit in Close Call Only Mode.
Press and hold Func then Hold/
Scan/Srch Press to start/continue/resume scanning in Scan Mode.
Press to toggle 'ID Search' or 'ID Scan' while scanning a trunked system in Scan Mode.
Press and hold Func then Scan/Srch to start/continue/resume searching in Search Mode.
Press and hold Func then Scan/Srch to start a 'quick search' at the current frequency while scanning a conventional system in Scan Mode.
L/O Press to lockout a channel in Scan Mode.
Press to lockout a frequency in Search Mode.
Press and hold to unlock (and enable) all groups and channels in a system in Scan Hold Mode.
Press and hold to unlock all frequencies of all search ranges/Close Call in Search Hold Mode.
Press and hold Func then L/O to lockout a system/search in Scan Hold Mode.
Press and hold Func then L/O to review and unlock search frequencies in Search/Close Call Only Modes.
Press to exit Menu Mode or return to the last mode.
Press and hold for more than 2 seconds to turn the scanner on or off.
Press to turn the display backlight on or off.
Press and hold Func then
http://marksscanners.com/396/396.shtml (10 of 51)8/17/2010 10:11:40 PM
to toggle Close Call DND, Close Call Priority, or Close Call Off in Any Mode except Tone-out.
to toggle the key lock on or off in Any Mode.