Fill The Fuel Tank; Check The Hydraulic Fluid - Toro REELMASTER 6700-D Operator's Manual

3. If coolant is low, remove the degasser tank cap and add a
50/50 mixture of water and Peugeot-recommended anti-
freeze (Toro Part No. 93-7213). DO NOT USE WATER
ONLY OR ALCOHOL/METHANOL BASE COOLANTS.
4. Install the degasser tank cap.
5. Close the hood and secure the latch.
FILL THE FUEL TANK (Fig. 5)
Fuel tank capacity is 56 liters.
1. Remove the fuel tank cap.
2. Fill the tank to about one inch below the top of the tank
(not the filler neck) with No. 2 diesel fuel. Then install the
cap.
CHECK HYDRAULIC FLUID (Fig. 6)
Because diesel fuel is flammable, use caution when stor-
ing or handling it. Do not smoke while filling the fuel
tank. Do not fill the fuel tank while the engine is run-
ning, hot, or when the machine is in an enclosed area.
Always fill the fuel tank outside and wipe up any spilled
diesel fuel before starting the engine. Store fuel in a
clean, safety-approved container and keep the cap in
place. Use diesel fuel for the engine only; not for any
other purpose.
The hydraulic system is designed to operate on anti-wear
hydraulic fluid. The machine's reservoir is filled at the factory
with approximately 32 liters of Mobil 424 hydraulic fluid.
Check the level of hydraulic fluid before the engine is first
started and daily thereafter.
Group 1 Hydraulic Fluid (Recommended for ambient tempera-
tures consistently below 38° C.):
ISO type 46/68 anti-wear hydraulic fluid
Mobil
Amoco
International Harvester
Texaco
Shell
Union OIl
Chevron
DANGER
Mobil Fluid 424
Amoco 1000
Donax TD
Hydraulic/Tractor Fluid
Tractor Hydraulic Fluid
1. Fuel tank cap
1. Hydraulic tank cap
Hy-Tran
TDH
Figure 5
Figure 6
11