Maintenance; Recommended Maintenance Schedule(S) - Toro F60 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
Before each use or daily
Every 50 hours
Every 250 hours
Every 400 hours
Yearly
Maintenance Procedure
• Tighten the caster wheel nuts.
• Tighten the caster wheel nuts.
• Check the height-of-cut setting.
• Inspect the flail rotors and blades for damage, cracks, and loose fasteners. Replace
any damaged or cracked parts.
• Grease the cutting unit (grease them immediately after every washing regardless of
the interval listed).
• Check the front flaps.
• Check for any unusual vibration of the rotor.
• Clean the cutting unit.
• Inspect the blades for damage and excessive wear.
• Ensure that each blade bolt is torqued to 45 N∙m (33.2 ft-lb).
• Check the gearbox lubricant.
• Tighten the caster wheel nuts.
• Check the blade bolts.
• Ensure that the caster tires are at the correct tire pressure.
• Check for excessive play in the rotor bearings.
• Check the belt tension.
• Ensure that the belt drive and taper-lock bushing set screws are tightened to the
correct torque.
• Change the gearbox lubricant.
• Replace the blades.
16