Table Of Contents; Safety; General Safety - Toro F60 Operator's Manual

Contents
Safety ....................................................................... 3
General Safety ................................................... 3
Cutting Unit Safety.............................................. 4
Blade Safety ....................................................... 4
Safety and Instructional Decals .......................... 4
Setup ........................................................................ 6
1 Preparing the Machine..................................... 6
2 Assembling the Caster Arms and Casters
to the Cutting Unit ........................................... 7
3 Installing the Debris Guard to the Front
Axle................................................................. 9
4 Installing the Cutting Unit to the
Machine .......................................................... 9
5 Installing the PTO Guard.................................11
6 Adjusting the Sensor Bracket ..........................11
7 Adjusting the Weight Transfer .........................11
8 Checking the Gearbox Oil .............................. 12
9 Checking the Caster Tire Pressure................. 12
10 Greasing the Machine.................................. 12
Product Overview ................................................... 12
Specifications .................................................. 12
Attachments/Accessories ................................. 12
Operation ................................................................ 13
Cutting Unit General Information....................... 13
Adjusting the Height of Cut ............................... 13
Inspecting the Blades ....................................... 14
Operating Tips ................................................. 15
Maintenance ........................................................... 16
Recommended Maintenance Schedule(s) ........... 16
Daily Maintenance Checklist............................. 17
Lubricating the Cutting Unit............................... 18
Checking the Lubricant in the Gearbox.............. 19
Changing the Lubricant in the Gearbox ............. 19
Checking the Belt Tension ................................ 20
Checking the Belt Drive and Taper Lock
Hardware ...................................................... 21
Removing the Cutting Unit from the
Machine ........................................................ 21
Servicing the Bushings in the Caster
Arms ............................................................. 22
Servicing the Caster Wheels and
Bearings........................................................ 22
Checking the Blade Bolts.................................. 23
Checking the Front Flaps.................................. 23
Clearing a Blocked Rotor .................................. 23
Checking the Caster Tire Pressure ................... 23
Checking for Rotor Vibration ............................. 23
Checking the Rotor Bearings ............................ 24
Sharpening the Blades ..................................... 24
Replacing the Blades........................................ 25
Cleaning Under the Cutting Unit........................ 25
Storage ................................................................... 26

Safety

This machine has been designed in accordance with
ANSI B71.4 and MSD.

General Safety

This product is capable of amputating hands and feet.
Always follow all safety instructions to avoid serious
personal injury.
•
Read and understand the contents of this
Operator's Manual before starting the machine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep clear of any discharge opening.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Before you leave the operator's position, do the
following:
- Park the machine on a level surface.
- Lower the cutting unit(s).
- Disengage the drives.
- Engage the parking brake (if equipped).
- Shut off the engine and remove the key.
- Wait for all movement to stop.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
3
, which