Removing The Meat Drawer And Cover - Whirlpool 3ET16NKXDG00 Use And Care Manual

To r&stall shelf~
1. Hold shelf at front and hack.
2. Till front of shelf up to a 45" angle to track.
3. Insert both rear shelf slides into upper
Upper channel
f track
channel of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are
securefy in the track before letting go of
shelf.
lnrert rear shett s
Into upper channel of
track.
Removing the meat drawer and cover
Style 1
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lii front of meat drawer and slide meat
drawer out the rest of the way.
3. Replace in reverse order.
To adjust the cover positIon:
1. lilt front of cover up.
2. Lll hack of cover.
3. Pull cover straight out.
To replace the cover:
1. Guide the cover's rear hooks into the
slots in the sheff supports on cabinet wall.
2. Tilt cover up at front until the hooks
drop into slots.
STYLE 1
3. Lower front of cover to a level
position.
13