Removing The Crispers And Crisper Cover; Adjusting The Crisper Humidity Control; Removing The Meat Drawer And Cover - Whirlpool ED25D Use & Care Manual

Pull out to the stop,
Lift the cover
the back.
Pull out to the stop, lift the
front and pull again.
Removing the crispers and crisper cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1. Lift front of cover off supports.
2. Lift out cover by pulling up and out.
To replace the cover:
1. Fit back of cover in notch supports on walls
of refrigerator.
2. Lower into place.
NOTE: Glass cover will fit only above full width
crisper. Crisper(s) must be removed before
removing cover.
Adjusting the crisper humidity control
You can control the amount of humidity in the
moisture-sealed crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open) lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HIGH (closed) keeps moist air in the crisper for
best storage of fresh leafy vegetables.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer and crispers.
2. Lift front of cover off supports.
3. Lift out cover by pulling up and out.
To replace the cover:
1. Fit back of cover in notch supports on walls
of refrigerator.
2. Lower into place.
3. Replace meat drawer and crispers.
7