Removing The Meat Drawer And Cover; Adjusting The Meat Drawer Temperature; Removing The Door Shelves - Whirlpool ED20F134RN0 Owner's Manual

Pull out to the stop, lift the
front and pull again.
Use control to adjust meat
drawer temperature.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove sealed crisper and meat drawer.
2. Lift front of cover off supports.
3. Lift cover up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator cabinet.
2. Lower front into place.
3. Replace sealed crisper and meat drawer.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and refrigerator.
This helps keep the meat drawer colder than the
rest of the refrigerator for best storage of meats.
Slide the control to let more or less cold air
through.
Removing the door shelves
Shelves can be removed for easier cleaning.
To remove a shelf:
1. Grasp shelf at both ends.
2. Lift shelf up and pull out.
To replace a shelf:
1. Insert shelf hooks into guides on both sides of
the door.
2. Push shelf down until it locks into place.