Table of Contents
Advertisement
Removing
the pull-out
freezer
floor
(on some
models)
The freezer floor pulls out for easier access to
foods in the back of the freezer and for easier
cleaning.
To remove the freezer floor:
1. Lii both back "fences" up and out.
2. Pull floor out about 1 inch (2.5 cm) with one
hand around the air tower section (center
back) and one hand at center front.
3. Lii floor up at rear until hooks release from
cabinet.
4. Pull floor out the rest of the way.
To replace the freezer floor:
1. Position back of floor into freezer opening.
2. Slide floor straight in until hooks drop into
place at rear of cabinet.
3. Replace "fences" by aligning pins with
sockets in the floor. Push down until they
snap into place.
Using
the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller
they get.
To remove Ice:
1. Hold tray at both ends.
2. Twist slightly.
17
Advertisement
Table of Contents
