Adjusting The Crisper Humidity Control; Adjusting The Crisper Cover Track - Whirlpool 3ET16NKXDG00 Use And Care Manual

No-frost refrigerator-freezer
Table of Contents

Advertisement

Adjusting
the crisper
humidity
control
You can control the amount of humidity in
the moisture-sealed crispers. Adjust the
control to any setting between LOW and
HIGH.
l
LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
l
HIGH (dosed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
Adjusting
the crisper
cover track
Because your crispers are not the same size,
your crisper cover has an adjustable center
track so you can switch positions of the
crispers. You can adjust the center track with
the cover in the refrigerator by removing the
crispers and the cover insert.
To remove the center track:
1. Push up the cover insert from the bottom,
then slide out with both hands.
2. Gently pull up on front end of track.
3. Pull rear end of track out of opening in
cover.
To replace the center track:
1. Insert rear end of track (with hole) into
opening in cover.
2. Lower front end of track into slot.
3. Make sure rear end of track has snapped
into place on under side of cover.
15

Advertisement

Table of Contents
loading

Table of Contents