Table of Contents
Advertisement
External SCSI connection
Figure 47: Installing the connector in the server backplane
Ê Plug the connector (A) of the connection cable into the corresponding
opening in the backplane.
I
Make sure the plug engages properly.
Ê Connect the plug (B) of the connection cable (see
the "SCSI B" connector on the system board.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
U41612-J-Z156-2-76
Installing an external SCSI connection
A
chapter "Completion" on page
Options Guide
figure 46 on page
69f.
62) to
63
Advertisement
Table of Contents
