Table of Contents
Advertisement
Processors
Ê Carefully place the heat sink onto the processor.
I
Make sure the thermal paste on the underside of the heat sink is not
damaged.
Ê Fasten the heat sink with four screws (see
nally opposite screws, then the other two.
Ê Reinstall the processor cover (see
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
U41612-J-Z156-2-76
chapter "Completion" on page
Options Guide
Exchanging the processor
page
33). First undo two diago-
page
38).
69f.
41
Advertisement
Table of Contents
