Table of Contents
Advertisement
Exchanging the processor
Figure 26: Removing the old processor
Ê Release the socket lever by pressing it sideways and lifting it up as far as it
will go (1).
Ê Lift the installed processor carefully out of its socket (2).
Installing the new processor
V
ATTENTION!
The processor can only be installed in one direction. Note the marking
on one of the corners (see diagram below).
To avoid damaging the pins or the processor, do not force the processor
into the socket.
Figure 27: Installing the new processor
Ê Position the new processor above the socket, and press it carefully into the
socket (1).
Ê Lock the processor into place in the socket by pushing the socket lever back
into its original position (2).
40
2
1
1
2
Options Guide
Processors
U41612-J-Z156-2-76
Advertisement
Table of Contents
